Siemens LC21BA582 User Manual

8
Removing metal grease filter
1. Open the lock and fold down the metal grease filter. While
doing this, place your other hand under the metal grease
filter.
2. For edge extraction filters, pull the metal grease filter
downwards. While doing this, place your other hand under
the metal grease filter.
For additional filters, open the lock and fold down the metal
grease filter. While doing this, place your other hand under
the metal grease filter.
Notes
■ Grease may accumulate in the bottom of the metal grease
filter.
■ Hold the metal grease filter level to prevent grease from
dripping out.
3. Clean the metal grease filter.
Cleaning the metal mesh grease filters
: Risk of fire!
Grease deposits in the grease filter may catch fire.
Clean the grease filter at least every 2 months.
Never operate the appliance without the grease filter.
Notes
■ Do not use any aggressive, acidic or alkaline cleaning
agents.
■ When cleaning the metal mesh grease filters, also clean the
holder for the metal mesh grease filters in the appliance
using a damp cloth.
■ The metal mesh grease filters can be cleaned in the
dishwasher or by hand.
In the dishwasher:
Note: If the metal mesh grease filters are cleaned in the
dishwasher, slight discolouration may occur. This has no effect
on the function of the metal mesh grease filters.
■ Do not clean heavily soiled metal mesh grease filters together
with utensils.
■ Place the metal mesh grease filters loosely in the dishwasher.
The metal mesh grease filters must not be wedged in.
By hand:
Note: You can use a special grease solvent for stubborn dirt. It
can be ordered via the Online Shop.
■ Soak the metal mesh grease filters in a hot soapy solution.
■ Clean the filters with a brush and then rinse them thoroughly.
■ Leave the metal mesh grease filters to drain.
Installing the metal mesh grease filter
1. Insert the metal mesh grease filter.
While doing this, place the other hand under the metal mesh
grease filter.
2. Fold the metal mesh grease filter upwards, locking it in place.
Operating controls Hot soapy water:
Clean using a damp dish cloth and dry
with a soft cloth.
Risk of damage to the electronics from
penetrating moisture. Never clean oper-
ator controls with a wet cloth.
Do not use any stainless steel cleaners.
Area Cleaning agents

Siemens LC21BA582 Specifications

General

Brand	Siemens
Model	LC21BA582
Category	Ventilation Hood
Language	English