EasyManuals Logo

Siemens OpenAir GEB 1 User Manual

Siemens OpenAir GEB 1
4 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
CM2N4621en
16.03.2001
Siemens Building Technologies
Landis & Staefa Division
4
6
21
OpenAir
TM
Airdamperactuators
GEB...1
Rotary version, AC 24 V / AC 230 V
Electronic motor driven actuators for three-position and modulating control,
nominal torque 15 Nm, self-centering shaft adapter, mechanically adjustable
span between 0...90°, prewired with 0.9 m long connection cables.
Type-specific variations with adjustable offset and span for the positioning
signal, position indicator, feedback potentiometer, self-adaptation of the rotary
angle range, and adjustable auxiliary switches for supplementary functions.
This data sheet provides a brief overview of these actuators. Please refer to the
technical basics in CM2Z4621en for a detailed description as well as information on
safety, engineering notes, mounting and commissioning.
Use
For damper areas up to 3 m
2
, friction-dependent.
Suitable for modulating controllers (DC 0...10 V) or three-position controllers (e.g. for
outside air dampers).
For dampers having two actuators on the same damper shaft (tandem-mounted
actuators or Powerpack).
Remarks

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Siemens OpenAir GEB 1 and is the answer not in the manual?

Siemens OpenAir GEB 1 Specifications

General IconGeneral
Power Supply24 V AC/DC
Operating Voltage24 V AC/DC
OutputsTriac
Power Consumption3 VA
Humidity Range5% to 95% (non-condensing)

Related product manuals