Need help?Do you have a question about the Siemens PXM40 and is the answer not in the manual?
General| Display Type | TFT LCD |
|---|---|
| Power Supply | 24 V DC |
| Protection Class | IP65 |
| RAM | 4 GB |
| Interfaces | Ethernet, USB, RS232/RS485 |
| Touch Technology | Projected Capacitive |
| Communication Ports | Ethernet, RS232/RS485 |
| Operating Temperature | 0°C to 50°C |
Details document changes and version updates.
Lists all documents cited in this manual.
Provides essential information and prerequisites before proceeding.
Describes the network architecture and connections.
Covers essential IT security measures for the system.
Lists the necessary conditions and requirements for commissioning.
A detailed, sequential guide for touch panel installation and setup.
Compares Desigo touch panels with standard clients for operation.
Illustrates practical use cases for the Desigo Touch and Web system.
Details browser compatibility and support levels for web access.
Outlines compatibility with BACnet objects and Desigo system versions.
Specifies performance and operational limits for system components.
Lists image formats supported for displaying graphics.
Enumerate BACnet objects compatible with Desigo Touch and Web.
Provides a general overview of firmware update processes.
Specific instructions for updating firmware on PXM40/PXM50 devices.
Procedure to reset the PXG3.100 web interface to factory defaults.
To Next Page