12 / 22
Siemens Desigo Touch and Web CM111029en_04
Building Technologies Commissioning – Touch panel commissioning – Step-by-step 2014-08-15
You can select between two options:
· Retry or
· Tap Cancel to return to the home page.
Proceed as follows to switch user (e.g. shift work):
1. Tap Logout.
---> This logs out the current user.
2. Log in the new user (as per Login, see above).
The login page is displayed automatically every time the touch panel is started.
See also the following paragraph on
This completes the technical part of commissioning. Different settings are availa-
ble, however, for user-friendly operation of the touch panel. They can be edited
after login. To do this, see a detailed description in the operating instructions [4].
Procedure in case of
login error
Switch user
Options
To Next Page
Loading...
