Siemens RUGGEDCOM RST2228 User Manual

RUGGEDCOM RST2228
Installation Guide
10/2018
RC1359-EN-04
Preface
Introduction
1
Installing the Device
2
Device Management
3
Communication Ports
4
Technical Specifications
5
Certification
6

Siemens RUGGEDCOM RST2228 Specifications

General

Brand	Siemens
Model	RUGGEDCOM RST2228
Category	Switch
Language	English

Summary

Preface

Alerts

Defines DANGER, WARNING, CAUTION, IMPORTANT, and NOTE alerts for hazard and information highlighting.

Customer Support

Details how to contact Siemens support 24/7 via online, telephone, or mobile app for technical assistance.

Installing the Device

General Procedure

Unpacking the Device

Mounting the Device to a Rack

Details securing the device in a 48 cm (19 in) rack using purchased mount adapters.

Mounting the Device to a Panel

Explains how to mount the device on a panel using panel adapters and screws.

Connecting the Failsafe Alarm Relay

Connecting Power

Describes connecting dual redundant AC/DC power supplies using screw-type or pluggable terminal blocks.

Connecting High AC/DC Power

Provides instructions for connecting high voltage AC/DC power supplies safely.

Connecting Low DC Power

Details connecting low voltage DC power supplies, emphasizing positive voltage connection.

Device Management

Connecting to the Device

Configuring the Device

Details the configuration process using the RUGGEDCOM ROS interface after installation and network connection.

Inserting/Removing the CLP

Communication Ports

SFP Transceivers

Available Modules

Installing/Removing Modules

Provides step-by-step instructions and safety precautions for installing and removing media modules.

Technical Specifications

Power Supply Specifications

Operating Environment

Certification

Approvals

EMC and Environmental Type Tests

Summarizes passed EMC immunity tests (IEC 61850-3) and environmental tests (IEC 60068 series).