Need help?Do you have a question about the Siemens RUGGEDCOM RSG2100 and is the answer not in the manual?
Describes warnings for safety and property damage, graded by danger level.
Defines who is qualified to operate the product based on training and experience.
Details guidelines for correct product usage, including recommendations and compliance.
Lists registered trademarks and other designations that may be trademarks.
Explains the limitations of liability regarding publication consistency and future corrections.
Lists the key features and capabilities of the RUGGEDCOM RSG2100 switch.
Describes the device's ports, controls, and indicator LEDs on the display panel.
Lists the necessary tools and materials required for installing the RUGGEDCOM RSG2100.
Provides guidance on proper decommissioning and disposal to protect proprietary data and the environment.
Offers advice and considerations for connecting data cables, including copper and fiber options.
Outlines the step-by-step process for installing the device.
Details the steps for unpacking and visually inspecting the device and its contents.
Specifies special conditions for safe installation in Class I, Division 2, Zone 2 hazardous locations.
Explains various mounting options for the device, including rack, DIN rail, and panel.
Describes how to connect the failsafe relay to signal alarm conditions.
Details the procedures for connecting the device's single or dual AC and/or DC power supplies.
Explains how to access the device via RS232 console and Web interfaces for management.
Outlines the process for configuring the device after installation using its interface.
Shows the physical layout and slot assignments for communication modules.
Describes the meaning of the LED states indicating link/activity for each communication port.
Details the specifications and pin-outs for the device's copper Ethernet ports.
Describes the specifications for various fiber optic Ethernet port types and connectors.
Lists compatible SFP transceivers, their order codes, speed, mode, and distance.
Details the specifications for GBIC optic Ethernet ports, including installation.
Lists input ranges, fuse ratings, and maximum power consumption for power supplies.
Details the maximum switching voltage, current, and capacity of the failsafe relay.
Lists the IEEE networking standards supported by the device.
Provides detailed specifications for the device's copper Ethernet ports.
Lists specifications for fiber optic Ethernet ports, including optical parameters and distance.
Describes the environmental conditions, including temperature, humidity, and altitude.
Details the physical specifications like weight, ingress protection, and enclosure material.
Provides diagrams illustrating the overall, rack, and panel mounting dimensions.
Details the standards and certifications the RUGGEDCOM RSG2100 complies with.
Lists CSA and Sira certifications, including approvals for hazardous locations.
Declares compliance with essential requirements of relevant EU directives.
States compliance with FCC rules for Class A digital devices and radio frequency energy.
Details compliance with U.S. FDA standards for radiological health.
Declares compliance with Innovation, Science and Economic Development Canada standards.
Mentions compliance with ISO 9001:2015 quality management system requirements.
Lists compliance with Australian Communications and Media Authority standards.
Declares compliance with RoHS directives regarding restricted hazardous substances.
Lists additional standards and requirements the device meets.
Summarizes the Electromagnetic Compatibility (EMC) and environmental tests performed on the device.
To Next Page
General