Need help?Do you have a question about the Siemens RUGGEDCOM RX1501 and is the answer not in the manual?
General| Layer | Layer 2 |
|---|---|
| Ports | 8x 10/100/1000Base-T(X) ports |
| Interfaces | Ethernet |
| Operating Temperature | -40°C to +75°C |
| Mounting | DIN Rail or Wall Mount |
| Protocol Support | IEEE 802.1Q VLAN, IEEE 802.1p QoS, IEEE 802.3x Flow Control, IEEE 802.1D Spanning Tree, IEEE 802.1w Rapid Spanning Tree, IEEE 802.1s Multiple Spanning Tree |
| Management | Web-based, CLI, SNMP |
| Security | SSH, SSL, RADIUS, TACACS+, Port Security, MAC Filtering |
| Redundancy | RSTP, MSTP |
| Enclosure | Metal |
| Standards Compliance | IEC 61850-3, IEEE 1613 |
Explains the grading of safety notices used in the manual.
Defines personnel qualified to operate the product.
Lists necessary tools and materials for installing the device.
Important safety warnings regarding electrocution and radiation hazards.
Outlines the step-by-step process for installing the device.
Details on how to mount the device in a standard 19-inch rack.
Instructions for mounting the device onto a 35 mm DIN rail.
Instructions for attaching the device to a panel using screws.
Explains how to connect the failsafe relay for alarm signaling.
Details on connecting AC or DC power supplies to the device.
Instructions for connecting high voltage AC/DC power.
Instructions for connecting low voltage DC power supplies.
How to configure the device via its interface.
Lists EMC tests performed according to IEC 61850-3.
Details EMC immunity tests based on IEEE 1613.
Lists environmental tests like cold temperature and dry heat.
To Next Page
