Private Communication Systems
Mobile Phones
Disassembling the S6 Power
1. Remove battery and SIM-Card.
2. Unscrew antenna (1130).
3. Unscrew 2 oval head screws (1160) (Torx 1,8x12).
4. Turn out 2 short screws (1140) (Torx 1,8x8).
5. Remove plastic disks (1170) and turn out the 3 long flat head screws
(1150)
(Torx 1,8x12).
6. Lift off the lower case shell (1050).
7. Lift composite of MMI-board (1020) and RF-and controle module (1010) out
of the upper case shell (1040).
Only for level-2 repairs:
a) Remove ringer gasket (1080) from the MMI board (1020).
b) Remove RF plug from RF- and control module (1010).
c) Take off the MMI board (1020).
d) Take frame (1060) off the RF- and control module (1010).
e) Remove interconnector (1090) from the frame (1060).
8. If necessary: Take battery connector out of lower case shell (1050).
9. Take dust protection frame (1075) off the display glass frame (1070).
10. Take keypad (1030) out of upper case shell (1040).
11. Remove earphone capsule (1120) and microphone (1110) from upper case
shell.
V1.2 Page 6 of 18 PN MP ST
D. Schnoor
4/98
To Next Page
Loading...
Need help?
General
