Siemens SCALANCE W788-2 M12 - Page 381

Configuring with Web Based Management
6.9 "Security" menu
SCALANCE W780/W740 to IEEE 802.11n Web Based Management
Configuration Manual, 08/2018, C79000-G8976-C267-13
381
Description
The table has the following columns:
●
Security context
Shows the security context.
●
Dot1x User Name
Enter the user name with which you want to log on to the RADIUS server.
●
Dot1x User Password
Enter the password for the user name selected above. The client logs on with the
RADIUS server using this combination.
For password assignment, ASCII code 0x20 to 0x7e is used.
●
Dot1x User Password Confirmation
Confirm the password.
●
Dot1X Server Certificate
Specify whether or not the RADIUS server identifies itself to the client using a certificate.
●
Dot1x EAP Types
Specify the authentication methods. The following methods exist:
– Auto
Client offers RADIUS server all methods.
– EAP-TLS
Extensible Authentication Protocol - Transport Layer Security
Uses certificates for authentication.
– EAP-TTLS
Extensible Authentication Protocol - Tunnel Transport Layer Security
After setting up the TLS tunnel, MS-CHAPv2 is used for internal authentication.
– PEAP
Protected Extensible Authentication Protocol
Alternative draft protocol of IETF for EAP-TTLS