To Next PageTo Next Page
Need help?Do you have a question about the Siemens SCALANCE W738-1 M12 and is the answer not in the manual?
General| Device Type | Wireless Access Point |
|---|---|
| Model | SCALANCE W738-1 M12 |
| Wireless Standard | IEEE 802.11a/b/g/n |
| Frequency Band | 2.4 GHz / 5 GHz |
| Data Rate | up to 300 Mbps |
| Protection Class | IP65 |
| Antenna Connector | M12 |
| Antenna Connection | External antennas |
| Operating Temperature | -20°C to +60°C |
| Power Supply | 24 V DC |
| Ethernet Ports | 1 x 10/100/1000 Mbit/s |
Highlights important safety notices to observe for safe operation and handling.
Provides general recommendations to prevent unauthorized access to the device and network.
Discusses password management and user authentication for security.
Details recommendations for using SSL/TLS certificates and keys for secure communication.
Covers security measures for physical access and remote management connections.
Provides security recommendations related to VLANs, firewall rules, and software updates.
Advises on using secure protocols and disabling or restricting non-secure ones.
Provides crucial safety notices for installing the device.
Specifies safety instructions for hazardous locations under ATEX, IECEx, UKEX, and CCC Ex.
Outlines safety notices required for using the device under FM conditions.
Covers safety notices for connecting the device and handling lightning protection.
Details safety precautions for connecting in hazardous areas and handling cables.
Provides safety notices for UL-HazLoc conditions and restricted area applications.
Explains the two power supply options (M12 socket, PoE) and cable requirements.
Describes the Ethernet interfaces and their pin assignments.
Details the N-Connect antenna connectors and the procedure for connecting antennas.
Guides on how to safely remove and insert the PLUG for configuration.
Explains EMC grounding, protective earth, and how to connect the functional ground.
Details how to configure devices using the PRESET-PLUG functionality.
Explains the process of creating a PRESET-PLUG using the Command Line Interface.
Guides on how to reset the device parameters to factory default settings.
