To Next PageTo Next Page
Need help?Do you have a question about the Siemens SCALANCE W774-1 and is the answer not in the manual?
General| Product Type Designation | SCALANCE W774-1 |
|---|---|
| Frequency Bands | 2.4 GHz, 5 GHz |
| Wireless Standards | IEEE 802.11a/b/g/n/ac |
| Number of Radio Interfaces | 2 |
| Max Data Rate | 1.3 Gbps |
| Power Consumption | max. 12 W |
| Operating Temperature | -20 °C to +60 °C |
| Protection Class | IP30 |
| Mounting Type | DIN rail, wall mounting |
| Power Supply | 24 V DC |
| Product Type | Industrial Wireless LAN Access Point |
| Ethernet Ports | 1 x 10/100/1000 Mbps |
| Weight | Approx. 500 g |
Overview and identification of the SCALANCE W774-1/W734-1 RJ-45 variant.
Describes the location and function of the reset button on the device.
Instructions and drilling template for mounting the device on a wall.
Details on lightning protection, power supply requirements, and grounding procedures.
Describes the power supply options, including direct feed-in and Power over Ethernet (PoE).
Procedure for loading new firmware via TFTP when WBM/CLI are unavailable.
Steps to reset the device to its original factory default settings.
