Siemens SCALANCE W770 Series

SIMATIC NET
Industrial Wireless LAN
SCALANCE W770/W730 acc. to
IEEE 802.11n Command Line
Interface
Configuration Manual
09/2017
C79000-G8976-C324-08
Introduction
1
Description
2
Security recommendations
3
Configuration
4
Functions specific to
SCALANCE
5
System time
6
Network structures
7
Network protocols
8
Load control
9
Layer 3 functions
10
Security and authentication
11
Diagnostics
12

Siemens SCALANCE W770 Series Specifications

General

Brand	Siemens
Model	SCALANCE W770 Series
Category	Wireless Access Point
Language	English

Summary

Description

2.1 Configuration limits for WBM and CLI

Security recommendations

General

Provides general security advice for device operation, plant security, and network isolation.

Physical access

Software (security functions)

Advises keeping software updated, monitoring security advisories, and activating only required protocols.

Configuration

System time

6.1 System time setting

Network structures

7.1 WLAN

Covers commands for configuring and managing wireless LANs, with mode-specific options for access points and clients.

Network protocols

8.1 IPv4 protocol

Describes commands for Internet Protocol version 4, including configuration, routing, and client settings.

8.2 IPv6 protocol

Layer 3 functions

10.1 NAT

Security and authentication

11.1 User rights management

Covers commands for administrator access and authentication methods, including roles and user accounts.

11.2 RADIUS client

11.3 WLAN

Covers commands for configuring and managing wireless LANs, including security settings like encryption and authentication.

11.4 MAC access control list

11.5 IP access control list