● System up time
● System name
● System contact
● System location
● Device Type
● Restart counter
● Config Save mode
● Config Change: This indicates whether or not the current configuration has been saved.
● Login Authentication mode: This indicates whether the authentication is made locally or on
the RADIUS server.
4.1.1.4 show ethernetip
Description
This command shows the current EtherNet/IP configuration.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#
Syntax
Call the command without parameters:
show ethernetip
Result
The current EtherNet/IP configuration is displayed.
4.1.1.5 show im
Description
This command shows information on device-specific vendor and maintenance data such as
the article number, serial number, version numbers etc.
Configuration
4.1 System
SCALANCE W770/W730 acc. to IEEE 802.11n Command Line Interface
Configuration Manual, 09/2017, C79000-G8976-C324-08 51
To Next Page
Loading...
Need help?
General
