The command prompt is as follows:
cli> or cli#
Syntax
Call the command without parameters:
show ip dns
Result
Information on the DNS client is displayed.
8.1.1.6 show ip dns cache
Description
This command shows the content of the DNS cache. The DNS cache buffers replies of the
DNS server for a brief time. This allows other queries for the same name to be replied to directly
without sending another query to the DNS server.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#
Syntax
Call the command without parameters:
show ip dns cache
Result
The content of the DNS cache is displayed.
8.1.1.7 show ip dns name-server
Description
This command shows information about the DNS servers configured on the device. The table
contains the index, the address type (e.g. IPv4) as well as the IP address and the origin.
Network protocols
8.1 IPv4 protocol
SCALANCE W770/W730 acc. to IEEE 802.11n Command Line Interface
344 Configuration Manual, 09/2017, C79000-G8976-C324-08
To Next Page
Loading...
Need help?
General
