Further notes
You display the setting with the show wlan security ap-radius-authenticator
command.
See also
wlan security ap-radius-authenticator reauth-interval (Page 506)
show wlan security ap-radius-authenticator (Access Point) (Page 496)
11.3.2.10 wlan security ap-radius-authenticator shared-secret
Description
With this command, you configure the password for the RADIUS server.
Note
This command is available only in access point mode.
Requirement
You are in the WLAN Configuration mode of the WLAN interface.
The command prompt is as follows:
cli (config-wlan)#
Syntax
Call up the command with the following parameters:
wlan security ap-radius-authenticator shared-secret <index(1-2)>
<string>
The parameters have the following meaning:
Parameters Description Range of values / note
index Index of the RADIUS server 1...2
string Password Enter the password of the RADIUS
server.
Result
The password is configured.
Security and authentication
11.3 WLAN
SCALANCE W770/W730 acc. to IEEE 802.11n Command Line Interface
508 Configuration Manual, 09/2017, C79000-G8976-C324-08
To Next Page
Loading...
Need help?
General
