The parameters have the following meaning:
Parameter Description Range of values / note
show-
methods
Lists the available types of
authentication
● open-system
Without authentication. Encryption with a fixed
(unchanging) key can be selected as an option. To
enable encryption, use the "wlan security
encryption" command.
● shared-key
A fixed key is stored for authentication.
● wpa (Radius)
WPA authentication.
● wpa-psk
WPA authentication without RADIUS server.
● wpa2 (Radius)
WPA2 authentication.
● wpa2-psk
WPA2 authentication without RADIUS server.
● wpa-wpa2-auto (Radius)
WPA and WPA2 authentication
● wpa-wpa2-auto-psk
WPA and WPA2 authentication without a RADIUS
server
methods Value corresponding to an
authentication method.
Result
The type of authentication is specified.
Further notes
You display the settings with the show wlan security command.
See also
no wlan security encryption (client) (Page 523)
11.3.4.2 wlan security cipher (client)
Description
With this command, you configure the encryption method for the WPA(2) authentication.
Note
This command is only available in the client mode.
Security and authentication
11.3 WLAN
SCALANCE W770/W730 acc. to IEEE 802.11n Command Line Interface
Configuration Manual, 09/2017, C79000-G8976-C324-08 515
To Next Page
Loading...
Need help?
General
