The parameters have the following meaning:
Parameter Description Range of values / note
instance-id Number of the instance or range of in‐
stances whose settings are displayed
● 1 ... 64
● 4094
detail Shows detailed information about the
selected interface
-
Result
The settings for the spanning tree configuration are displayed.
Further notes
You display the general settings for the Spanning Tree Protocol with the show spanning-
tree command.
7.3.1.9 show spanning-tree mst interface
Description
This command shows port-specific settings of a Multiple Spanning Tree configuration.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#
Syntax
Call up the command with one of the following parameter assignments:
show spanning-tree mst
[<instance-id(1-64|4094)>] interface<interface-type><interface-id>
[{stats|hello-time|detail}]
The parameters have the following meaning:
Parameter Description Range of values / note
instance-id Number of the instance or range of instances
whose settings are displayed
● 1 ... 64
● 4094
interface-
type
Type or speed of the interface Enter a valid interface.
interface-
id
Module no. and port no. of the interface
Network structures
7.3 Spanning Tree
SCALANCE W770/W730 acc. to IEEE 802.11n Command Line Interface
Configuration Manual, 09/2017, C79000-G8976-C324-08 307
To Next Page
Loading...
