Siemens SCALANCE W770 Series User Manual

Requirement
You are in the Interface Configuration mode of the WLAN interface.
The command prompt is as follows:
cli (config-if-wlan-0-X)#
Syntax
Call the command without parameters:
wlan aeroscout
Result
AeroScout is enabled.
5.8.2.2 no wlan aeroscout
Description
With this command, you disable AeroScout for the specified WLAN interface.
Requirement
You are in the Interface Configuration mode of the WLAN interface.
The command prompt is as follows:
cli (config-if-wlan-0-X)#
Syntax
Call the command without parameters:
wlan no aeroscout
Result
AeroScout is disabled.
5.9 Spectrum analyzer
This section describes the commands relevant for working with the spectrum analyzer.
Functions specific to SCALANCE
5.9 Spectrum analyzer
SCALANCE W770/W730 acc. to IEEE 802.11n Command Line Interface
Configuration Manual, 09/2017, C79000-G8976-C324-08 155

Siemens SCALANCE W770 Series Specifications

General

Brand	Siemens
Model	SCALANCE W770 Series
Category	Wireless Access Point
Language	English