snmp community index <CommunityIndex> name <CommunityName>
security <SecurityName> [context <Name>][{volatile|nonvolatile}]
The parameters have the following meaning:
Parameter Description Range of values / note
CommunityIndex Index of the community max. 32 characters
name Keyword for the name of the community -
CommunityName Name of the community max. 32 characters
security Keyword for the security name -
SecurityName Security name max. 32 characters
context Keyword for the context name -
Name Context name max. 32 characters
Storage type Specifies whether the settings remain
following a restart.
● :
The settings are lost after a
restart
● :
The settings are retained after
a restart
If optional parameters are not specified when configuring a community, the default values
apply.
Note
Community string
For security reasons, do not use the standard values "public" or "private". Change the
community strings following the initial installation.
The recommended minimum length for community strings is 6 characters.
Result
The settings are configured.
Further notes
You delete the details of an SNMP community with the no snmp community index
command.
You show the details of an SNMP community with the show snmp community command.
You show the status information of the SNMP communication with the show snmp command.
8.6.2.7 no snmp community index
Description
With this command, you delete the details of an SNMP community.
Network protocols
8.6 SNMP
SCALANCE W770/W730 acc. to IEEE 802.11n Command Line Interface
418 Configuration Manual, 09/2017, C79000-G8976-C324-08
To Next Page
Loading...
Need help?
General
