Syntax
Call up the command with the following parameters:
clear line vty {<line-number(2-9)>|all}[forceful-clear]
The parameters have the following meaning:
Parameter Description Range of values / note
line-number Number of the connection that will be
terminated
2 ... 9
all terminates all connections -
forceful-clear closes a session that is not reacting -
Result
The console session is closed.
Further notes
You show the logged-on users with the show users command.
4.1.5 disable
Description
With this command, you close the Privileged EXEC mode.
You are then in the User EXEC mode.
Requirement
You are in the Privileged EXEC mode.
The command prompt is as follows:
cli#
Syntax
Call the command without parameters:
disable
Result
You are in the User EXEC mode.
The command prompt is as follows:
cli>
Configuration
4.1 System
SCALANCE W770/W730 acc. to IEEE 802.11n Command Line Interface
Configuration Manual, 09/2017, C79000-G8976-C324-08 61
To Next Page
Loading...
Need help?
General
