Siemens SCALANCE W770 Series User Manual

4.5.2.1 sinema
Description
With this command, you enable the SINEMA configuration interface.
Requirement
You are in the Global Configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call the command without parameter assignment:
sinema
Result
The SINEMA configuration interface is enabled.
Further notes
You disable the SINEMA configuration interface with the no sinema command.
You display the setting whether the SINEMA configuration interface is enabled or disabled
with the command show sinema.
4.5.2.2 no sinema
Description
With this command, you disable the SINEMA configuration interface.
Requirement
You are in the Global Configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call the command without parameter assignment:
no sinema
Configuration
4.5 SINEMA
SCALANCE W770/W730 acc. to IEEE 802.11n Command Line Interface
Configuration Manual, 09/2017, C79000-G8976-C324-08 107

Siemens SCALANCE W770 Series Specifications

General

Brand	Siemens
Model	SCALANCE W770 Series
Category	Wireless Access Point
Language	English