11.1.4.1 role
Description
With this command, you create roles that are valid locally on the device.
Requirement
You are in the Global configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call up the command with the following parameters:
role <role-name> function-rights <function-rights-value(1-15)>
[description <role-description>]
The parameters have the following meaning:
Parameter Description Range of values / note
role-name Role name Enter a name for the role. The name must
meet the following conditions:
● It must be unique.
● It must be between 1 and 64
characters long.
function-rights Keyword for the function rights -
function-
rights-value
Value of the function rights Select the function rights of the role.
● 1
Users with this role can read device
parameters but cannot change them.
● 15
Users with this role can both read and
change device parameters.
description Keyword for the description -
role-
description
Content of the description Enter a description for the role. The de‐
scription text can be up to 100 characters
long.
Security and authentication
11.1 User rights management
SCALANCE W770/W730 acc. to IEEE 802.11n Command Line Interface
Configuration Manual, 09/2017, C79000-G8976-C324-08 477
To Next Page
Loading...
Need help?
General
