Further notes
You disable the RADIUS server with the no wlan security ap-radius-
authenticator command.
You display the setting with the show wlan security ap-radius-authenticator
command.
See also
no wlan security ap-radius-authenticator (Page 500)
show wlan security ap-radius-authenticator (Access Point) (Page 496)
11.3.2.2 no wlan security ap-radius-authenticator
Description
With this command, you disable the RADIUS server.
Note
This command is available only in access point mode.
Requirement
You are in the WLAN Configuration mode of the WLAN interface.
The command prompt is as follows:
cli (config-wlan)#
Syntax
Call up the command with the following parameters:
no wlan security ap-radius-authenticator <index (1-2)>
The parameter has the following meaning:
Parameters Description Range of values / note
index Index of the RADIUS server 1...2
Result
The RADIUS server is disabled.
Security and authentication
11.3 WLAN
SCALANCE W770/W730 acc. to IEEE 802.11n Command Line Interface
500 Configuration Manual, 09/2017, C79000-G8976-C324-08
To Next Page
Loading...
Need help?
General
