Configuration
4
The following is described in this section:
● System settings
● Saving and loading configurations and firmware
● Restart of the device and restoring the factory defaults
● Saving and restoring configuration backups
4.1 System
This section describes commands with which general system properties can be displayed and
configured.
4.1.1 show commands
This section describes commands with which you display various settings.
4.1.1.1 show cli-console-timeout
Description
This command shows the global configuration for the timeout of the CLI console.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#
Syntax
Call the command without parameters:
show cli-console-timeout
Result
The configuration for the timeout is displayed.
SCALANCE W770/W730 acc. to IEEE 802.11n Command Line Interface
Configuration Manual, 09/2017, C79000-G8976-C324-08 49
To Next Page
Loading...
Need help?
General
