Result
The following settings of the SCALANCE W700 device are displayed:
● Country code
● Device mode
● Commit Mode
See also
device mode (Page 205)
commit mode (Page 206)
country (Page 207)
7.1.1.13 show wlan force roaming ip-down (Access Point)
Description
This command shows the configuration of the function "Force Roaming on IP down" for the
required entry.
Note
This command is available only in access point mode.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#
Syntax
Call up the command with the following parameters:
show wlan force roaming ip-down [index <1-10>]
The parameter has the following meaning:
Parameter Description Range of values / note
index Keyword for the entry 1 ... 10
Result
The configuration of the required entry is displayed.
Network structures
7.1 WLAN
SCALANCE W770/W730 acc. to IEEE 802.11n Command Line Interface
Configuration Manual, 09/2017, C79000-G8976-C324-08 195
To Next Page
Loading...
Need help?
General
