Need help?Do you have a question about the Siemens SE53HS60AE and is the answer not in the manual?
General| Type | Freestanding |
|---|---|
| Appliance placement | Freestanding |
| Number of washing programs | 6 |
| AquaStop function | Yes |
| Water consumption per cycle | 9.5 L |
| Delay start | Yes |
| Half-load option | Yes |
| Water softening system | Yes |
| Place settings | 13 place settings |
| Product size | Full size (60 cm) |
| Width | 60 cm |
| Dimensions (H x W x D) | 85 x 60 x 60 cm |
Follow instructions carefully to prevent injury during installation.
Observe safety instructions for detergents and rinse aids to avoid health hazards.
Install appliance correctly, secure against tipping, and level using adjustable feet.
Connect the appliance to a mains supply of 220-240V, 50Hz or 60Hz.
Explanation of the control panel, buttons, and display functions for operating the device.
Required settings for first-time use or factory resets, including salt, rinse aid, and water softening.
Procedure to determine water hardness and set the desired softening level.
Instructions on how and when to fill the softener salt reservoir.
Step-by-step guide on how to add rinse aid to the reservoir.
Use only dishwasher-suitable detergents; combined with salt and rinse aid for best results.
Turn on the device; Eco 50° program is preset.
Adjust wash cycle based on crockery soiling by selecting a suitable program.
Details on setting water hardness, rinse aid, intensive drying, hot water, and factory reset.
Procedure to clean the appliance interior, remove deposits and prevent malfunctions.
How to run the machine cleaning program with appropriate cleaning agents.
Troubleshooting common error codes like E:20-60, E:30-00, E:31-00, E:34-00, E:32-00.
Solutions for dishes not being dry, including rinse aid and program selection.
Addressing issues like food remains, spray arm rotation, clogged nozzles, and strainer fitting.
Resolving issues related to detergent residue, water stains on plastic, and white deposits.
Dealing with difficult dirt, insufficient detergent, or incorrect program temperature.
Solutions for irreparable glass clouding and rust traces on cutlery.
Troubleshooting detergent dispenser issues, abnormal foaming, and indicator lights.
Resolving device not starting, malfunctions, and program interruptions.
Addressing appliance door issues, detergent dispenser lid problems, and operational sounds.
Procedure to clean the drain pump to remove food particles and prevent blockages.
How to contact customer service for questions, faults, or repairs, and required product details.
Information on the AQUA-STOP guarantee, conditions for compensation, and liability.
To Next Page