Siemens se5880 - Hardware Specifications; Physical Specifications; Operational Environment; Power Requirements

SIEMENS se5880 Ethernet Security Router
User’s Guide
Chapter 1 Product Specifications
Hardware Specifications
SIEMENS 2
Hardware Specifications
Physical Specifications
• Unit Dimensions:
– 8.4W x 7D x 1.7H inches
– 21.3W x 17.8D x 4.3H cm
• Weight:
–1.5 lbs.
–.68 Kg.
Operational Environment
• Temperature:
– 40°F to 105°F
– 5°C to 40°C
• Humidity: 20% to 80% non-condensing
Power Requirements
• AC Voltage:100 to 120V AC or 220 to 240V AC
• Frequency:50/60 Hz
• Consumption:10W maximum
• Built-in power supply with on/off switch
Processor
• Motorola
®
64 MHz MPC857DSL
• 8 MB DRAM, 4 MB Flash Memory
• 3DES, DES, MD5, SHA hardware assist
Ethernet Interfaces
• Trusted Ethernet Interface - Four port, full-
duplex 10/100-BaseT Ethernet switch (8-pin,
RJ-45)
• Untrusted (WAN) Ethernet Interface - Single
full-duplex 10/100-BaseT, switched Ethernet
port (8-pin, RJ-45)
• Green/Amber LEDs
Serial Interface
• One RS-232 asynchronous console or modem
port (RJ-45)