Siemens SIMATIC MV540 S

Operator control and monitoring
SIMATIC MV500
Operating Instructions, 06/2018, C79000-G8976-C494-01
101
Reader status and access status
The reader status indicates the status of the reader at the current time.
Table 8- 1 Reader status
Icon
Description
Start
The reader has the status "Start". This means that the device is currently
in processing mode (RUN).
Stop
The reader has the status "Stop". This means that the device is currently
neither in processing mode nor in productive operation. There is no oper-
ation (STOP).
Edit
The reader has the status "Edit". This means that the device is currently in
edit mode and configuration changes can be made.
Adapt The reader has the status "Adapt". This means that the device is currently
in adaption mode. This mode is started either by the "READ" button or by
the "Full program" function in the program step "Overview > Auto-
adaption".
The access status indicates the status of the WBM at the current time.
Table 8- 2 Access status
Icon
Description
Red padlock
With "Read-only" status, no operation is possible because the WBM of
another PC has control over the optical reader.
Blue padlock
The logged on user is not authorized to change settings.
Red/gray padlock
DISA is active. Only users who have the "Take control" right are able to
take control of the optical reader from the controller.
Green padlock
The currently logged on user has taken control of the optical reader.
Standard views
The standard view allows you to switch between standard and extended view. In the
standard view, operator controls are grayed-out if they are not required for standard
applications. If the standard view is disabled, extended parameters are enabled for editing.