Siemens SIMATIC NET SCALANCE W M763-1 Series Reference Manual

Report no. E115352
cULus approval for industrial control equipment
cULus Listed PROG-CNTLR.
Underwriters Laboratories Inc. complying with
• UL 61010-1
• UL 61010-2-201
• CSA C22.2 NO 61010-1
• CSA C22.2 NO 61010-2-201
Report no. E115352
cULus Approval Hazardous Location
cULus Listed I. T. E. FOR HAZ. LOC.
Underwriters Laboratories Inc. complying with
• UL 121201 (Non Incendive electrical equipment) approved for use in Class I, Division 2,
Groups A, B, C, D, T4.
• UL CSA C22.2 NO 213 (Non Incendive electrical equipment) approved for use in Class I, Zone
2, Group IIC, T4.
FCC approval
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation.
___________________________________________________________________________
Notice
Changes or modi󹪝cations made to this equipment not expressly approved by SIEMENS may
void the FCC authorization to operate this equipment.
___________________________________________________________________________
IEEE 802.11b or g operation of this product in the USA is 󹪝rmware-limited to channels 1
through 11.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can
SCALANCE WxM763-1
2.5General approvals
Approvals SCALANCE W700 802.11ax
46 Reference Manual, 04/2023, C79000-G8976-C621-05

Siemens SIMATIC NET SCALANCE W M763-1 Series Specifications

General

Brand	Siemens
Model	SIMATIC NET SCALANCE W M763-1 Series
Category	Industrial Equipment
Language	English