EasyManua.ls Logo

Siemens SIMATIC NET SCALANCE WUM766-1 - Page 18

Siemens SIMATIC NET SCALANCE WUM766-1
54 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
FM
The product meets the requirements of the standards:
Factory Mutual Approval Standard Class Number 3611 / 3600 / 3810 / ANSI ISA-61010-1
FM Hazardous (Classi󹪝ed) Location Electrical Equipment:
Non Incendive / Class I / Division 2 / Groups A,B,C,D / T4 and
Non Incendive / Class I / Zone 2 / Group IIC / T4
cULus Approval for Information Technology Equipment
cULus Listed I. T. E.
Underwriters Laboratories Inc. complying with
UL 62368-1
CSA C22.2 No. 62368-1
Report no. E115352
cULus approval for industrial control equipment
cULus Listed PROG-CNTLR.
Underwriters Laboratories Inc. complying with
UL 61010-1
UL 61010-2-201
CSA C22.2 NO 61010-1
CSA C22.2 NO 61010-2-201
Report no. E115352
cULus Approval Hazardous Location
cULus Listed I. T. E. FOR HAZ. LOC.
Underwriters Laboratories Inc. complying with
UL 121201 (Non Incendive electrical equipment) approved for use in Class I, Division 2,
Groups A, B, C, D, T4.
UL CSA C22.2 NO 213 (Non Incendive electrical equipment) approved for use in Class I, Zone
2, Group IIC, T4.
FCC approval
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation.
SCALANCE WxM766-1
1.5General approvals
Approvals SCALANCE W700 802.11ax
18 Reference Manual, 04/2023, C79000-G8976-C621-05

Other manuals for Siemens SIMATIC NET SCALANCE WUM766-1

Related product manuals