1
SIMATIC Ident
RFID systems
Getting Started
SIMATIC RF610R 6GT2811-6BC10-*AA0
SIMATIC RF615R 6GT2811-6CC10-*AA0
SIMATIC RF650R 6GT2811-6AB20-*AA0
SIMATIC RF680R 6GT2811-6AA10-*AA0
SIMATIC RF685R 6GT2811-6CA10-*AA0
Purpose of the document
With this document, you can commission the SIMATIC readers RF650R, RF680R and RF685R of the SIMATIC RF600
system quickly and simply. It also explains how to test the basic functionality of the reader (reading RFID UHF
transponders) after commissioning.
Qualified personnel
The product/system belonging to this documentation may only be handled by qualified personnel for the intended
purpose taking into account the documentation relating to the intended purpose and, in particular, the safety and
warning notices it contains. Due to training and experience, qualified personnel is capable of recognizing risks and
avoiding possible dangers when handling these products/systems.
Correct usage of Siemens products
Note the following:
Siemens products may only be used for the applications indicated in the catalog and in the relevant technical
documentation. If third-party products and components are used, these must be recommended or approved by
Siemens. These products can only function correctly and safely if they are transported, stored, set up, mounted,
installed, commissioned, operated and maintained correctly. The permitted environmental and ambient conditions
must be adhered to. Notices in the relevant documentation must be observed.
To Next Page
Need help?
General
