To Next PageTo Next Page
Need help?Do you have a question about the Siemens SIMATIC RF186C and is the answer not in the manual?
General| Antenna Type | Integrated |
|---|---|
| Protection Class | IP67 |
| Operating Temperature | -25°C to +70°C |
| Supply voltage | 24 V DC |
| Power Supply | 24 V DC |
| Antenna Connection | Integrated |
| RF Output Power | Up to 2 W ERP |
| Read Range | Up to 6 m |
| Weight | Approximately 300 g |
| Communication Protocol | ISO 18000-6C (EPC Gen2) |
| Interfaces | Ethernet, RS232, RS485 |
| Communication Interface | Ethernet, RS232, RS485 |
Details the purpose, scope, and validity of the operating instructions.
Provides guidelines for securing the communication module and its operation.
Details the properties and application areas of the communication modules.
Outlines procedures for configuring modules based on user type (S7, XML, OPC UA).
Describes the physical design and integration into automation systems.
Covers physical dimensions, required clearances, and mounting guidelines.
Details restrictions and considerations for high-altitude operation.
Explains PROFINET IO connection and network topology options.
Covers electrical design, power supply, and grounding principles.
Details on connecting module interfaces, including pin assignments.
Procedures for assigning unique IP addresses and device names.
Explains configuration procedures using PROFINET, XML, and OPC UA interfaces.
Guides on initiating and navigating the Web Based Management interface.
Details the WBM menu structure, parameters, and settings.
Explains configuration of digital inputs and outputs in SIMATIC controller.
Details programming the module using XML commands.
Describes supported methods and functions for OPC UA communication.
Details OPC UA variables and events for data access and diagnostics.
Explains programming the module using Rockwell controller add-on instructions.
Covers diagnostic options including LED displays and SNMP.
Provides a guide to understanding and resolving error messages.
Details on updating firmware and restoring factory settings.
Guidance on replacing modules and backing up configurations.
Technical specifications for RF185C, RF186C, and RF188C modules.
Technical specifications for RF186CI and RF188CI modules.
Provides detailed dimension drawings of the RF18xC/RF18xCI modules.
Information on system planning tools and connecting cable specifications.
Lists ordering data for modules, accessories, and product approvals.
Details the structure, parameters, and variables of Syslog messages.
Information on accessing Siemens support, documentation, and training.
