Preface
SINAMICS DCM DC Converter
6 Operating Instructions, 02.2015, A5E34763375/RS-AA/001
Note
Hardware/software compatibility
The hardware version of the Control Unit (CUD) must be taken into account when updating
the device software. See the table below.
The hardware version can be read from the label on the right
-hand side of the CUD.
Executable software versions
C98043-A7100-
-...
C98043-A7100-
-...
C98043-A7100-
-...
1.1, 1.2, 1.3
C98043-A7100-
-...
C98043-A7100-
-...
C98043-A7100-
-...
All versions
SINAMICS DCM documentation available
SINAMICS DCM DC Converters Operating Instructions
contains all information on
ordering, installation, connecting, commissioning, maintaining, description of functions,
and service
SINAMICS DCM Control Modules Operating Instructions
contains all information on
ordering, installation, connecting, commissioning, maintaining, description of functions,
and service
SINAMICS DCM List Manual (for DC converters and control modules)
parameter list, function diagrams, list of faults and alarms
SINAMICS free function blocks, function description
Includes a general description, list of parameters, the function block diagrams as well as
the list of faults and alarms.
SINAMICS DCM DVD documentation
manuals listed above, in all of the available languages
Function diagrams in VISIO® format
www.barghmaher.org