Siemens SiPass integrated

Manual Override
6
A6V11144326
27 | 66
Type
Command
Description
Part Arm
Arms inputs which are marked as Part Arm.
Part Arm B
Arms inputs which are marked as Part arm B. (SPC
intrusion only)
Force Arm
Manually force-arms an intrusion area. This action
includes isolating input points that may be in the
Alarm state, and then arming the area.
Force Part-arm
Manually part-arms an intrusion area. This action
includes isolating input points that may be in the
Alarm state, and then part-arming the area.
Silence All Bells
Reset the Alarm output from the SPC Panel
Clear Intrusion
Alarms
Temporarily Disable the all SPC zones in alarm on
the panel.
Elevator
Cancel Permanent
Action
Any current Permanent Command Event Task, or
Access/Internal Action operating on the point will be
cancelled. The next Control State in the Control
State Queue will take effect.
Floor off security
(unsecure)
Takes the floor off security, until the next change in
Time Sched-ule.
Floor on security
(secure)
Places the floor on security, until the next change in
Time Schedule.
Return to Time
Schedule control
The elevator will return to normal Time Schedule
control.
Unit
Siren On
Activates the local output, if connected.
Siren Off
De-activates the local output, if connected.
Door
Interlocking
Disable
Disable Door Interlocking.
Restore
Restore Door Interlocking.
Flag
Set flag to ‘False’
Enables this flag.
Set flag to ‘True’
Disables this flag.