Siemens SiPass integrated

Host event tasks
Sources
7
34 | 66
A6V11144326
Source
State (trigger)
Description
Special Date
Set time
An event task is triggered at the nominated date
time.
Time format = HH:MM:SS
Time Schedule
Start
An event task is triggered at the start of the
nominated time schedule.
Start and Stop
An event task is triggered at both the start and
end of the nominated time schedule.
Stop
An event task is triggered at the end of the
nominated time schedule.
Unit
Communication Back
An event task is triggered when communications
with the nominated controller has been restored.
Communication Lost
An event task is triggered when communications
with the nominated controller has been restored.
Incomplete Primary
Database
An event task is triggered to reinitialize the ACC
when the primary database is incomplete.
No Primary Database
An event task is triggered to reinitialize the ACC
when a primary database cannot be detected.
Operator Alarm
An event task is triggered when the nominated
controller enters an alarm state.
Operator Alarm
Actioned
An event task is triggered when an alarm,
associated with the nominated controller, is
actioned by an operator.
Operator Alarm Not
Actioned
An event task is triggered when the operator fails
to action an alarm associated with the nominated
controller before the (re-activation) timeout.
Operator Alarm
Timed out
An event task is triggered when the operator fails
to action the alarm associated with the
nominated controller and the alarm times out.
Operator Normal
An event task is triggered when the nominated
controller returns to a normal state.
Operator Restore
An event task is triggered when the nominated
controller attains ‘Restored’ status.
Operator Waiting for
Normal
An event task is triggered when a restorable
alarm at the nominated controller has been
actioned but has not returned to its normal state.
Reset
An event task is triggered when the nominated
controller is reset.
Flag
False
Flag has been set to false.
True
Flag has been set to true.