Need help?Do you have a question about the Siemens SISTORE AX4 Lite 1000/100 and is the answer not in the manual?
General| Category | DVR |
|---|---|
| Video Inputs | 4 |
| Audio Outputs | 1 |
| Storage Capacity | Up to 2 TB |
| Compression Format | H.264 |
| Network Interface | 10/100 Mbps Ethernet |
| Power Supply | 12V DC |
| Operating Temperature | 0°C to +40°C |
| Compression | H.264 |
| Recording Resolution | Up to 720 x 576 |
| Hard Drive Support | 1 SATA hard drive |
| Playback Speed | Real-time |
| Video Input | BNC |
| Resolution | 720x576 (PAL), 720x480 (NTSC) |
Defines the intended audience for the manual, outlining qualifications and activities.
Provides general safety precautions, warnings, and guidance for device operation and handling.
Explains the severity of hazards indicated by signal words like CAUTION.
Describes the nature of hazards indicated by icons used in the manual.
Details the buttons and indicators on the DVR's front panel.
Explains the functions of the infrared remote control.
Instructions for powering up the DVR unit.
Guides through the initial configuration of the DVR settings.
Describes how to log out of the DVR system.
Details the main setup interface and virtual keyboard usage.
Configures resolution, dwell, and auto deletion for recording.
Allows setting up recording schedules by time and day.
Configures recording of video prior to an event.
Configures network transfer speed, quality, and audio settings.
Sets up manual, DHCP, or ADSL network configurations.
Configures Dynamic DNS service for remote access.
Configures input settings for external alarm devices.
Sets up and configures motion detection parameters for cameras.
Configures actions and intervals for video loss detection.
Sets sensitivity and activation time for video blind detection.
Configures DVR to react to text input from devices like ATMs.
Configures self-diagnostics and system event reactions.
Displays the current status of DVR systems and inputs.
Selects information to be displayed on the monitor (On-Screen Display).
Configures video resolution and full-screen display for VGA output.
Adjusts display dwell time and event monitoring for the main monitor.
Configures camera settings, titles, and display modes (Normal/Covert).
Configures audio input association and audio output for cameras.
Configures titles, types, and dwell times for alarm outputs.
Sets up port and parameters for remote keyboard control.
Displays capacity, format, and usage of storage devices.
Shows disk bad sectors, temperature, and S.M.A.R.T. status.
Sets site name, system ID, language, and views software version.
Configures the DVR's date, time, time zone, and daylight saving.
Manages user accounts, groups, and authority levels.
Provides instructions for safely shutting down the DVR system.
Steps to power on the DVR unit and prepare for recording.
Navigating the live video display and main monitoring menu.
Freezes the current video image on the screen until unfrozen.
Displays cameras sequentially on the screen in a loop.
Accesses camera-specific functions like PTZ, Zoom, and Color Control.
Zooms the current video image of a selected camera.
Controls audio playback for selected cameras.
Adjusts brightness, contrast, hue, and saturation for cameras.
Resets DVR outputs and internal buzzer during an alarm state.
Starts or stops panic recording for all cameras.
Accesses the main setup screen for system configuration.
Exits live monitoring and enters the video search mode.
Manages user login and logout for system access.
Displays cameras associated with events if enabled in OSD.
Details how covert cameras are displayed based on user authority.
Explains using a mouse for DVR functions instead of front panel buttons.
Details video recording settings like Recycle, resolution, and speed.
Explains audio recording capabilities and limitations.
Guides on how to view recorded video clips and use playback controls.
Accesses the video search menu for various search types.
Searches and displays video based on the DVR's event log.
Provides detailed recording information and allows searching via a record table.
Searches for recorded video based on motion detection events.
Searches recorded video based on text input from devices like ATMs.
Allows navigation to specific dates/times or the first/last recorded image.
Guides on copying video clips to external storage devices.
Accesses camera features like Zoom, Audio, and De-Interlace in search mode.
Resets DVR outputs and internal buzzer in search mode.
Starts or stops panic recording in search mode.
Selects the data source for searching recorded data.
Exits search mode and returns to live monitoring.
Guides on preparing a USB drive for use with the DVR.
Monitors live video remotely via a web browser.
Searches recorded video remotely via a web browser.
Displays recording duration estimates based on quality and speed for PAL.
Displays recording duration estimates based on quality and speed for NTSC.
To Next Page
