A5E33329501 SITRANS LUT400 (HART) – OPERATING INSTRUCTIONS Page 11
mmmmm
Installing and Mounting
For a more detailed dimension drawing, see
SITRANS LUT400 Dimensions
on page
255
.
Wall mounting of the enclosure
1. Mark and drill four holes in the mounting surface for the four screws (customer
supplied).
2. Fasten with a screwdriver.
3. Line up slotted features on back of device with clips on mounting back plate. Press
the LUT400 flush against the back plate and slide downward to fasten in place.
mounting back plate
enclosure with blank lid
Note: Wall mount fasteners not included.
slotted features
clips (2 places)
clips (2 places)
back of enclosure
To Next Page
Loading...
