Siemens SN63HX60CE User Manual

Basic operation en
33
will help prevent excess pressure
building up in the appliance and stop
the appliance door bursting open.
1. Press ⁠.
a The programme is saved and the
appliance switches off.
2. Press to resume the pro-
gramme.
Terminate programme
To end a programme early or to
switch from a programme that has
already started, you will need to can-
cel it first.
1. Open the appliance door.
2. Press for approx.
4seconds.
3. Close the appliance door.
a All displays light up.
a As soon as the displays are off,
the display shows "0h:01m" and
the residual water is pumped out.
a The programme is cancelled and
ends after approx. 1minute.
Switching off appliance
1. Please note the information on
"Safe use" →Page11.
2. Press .
Tip:If you press during the wash
cycle, the programme currently run-
ning will be interrupted. When you
switch the appliance back on, the
programme continues automatically.

Siemens SN63HX60CE Specifications

General

Door color	Not applicable
Cord length	1.75 m
Product size	Full size (60 cm)
Built-in display	Yes
Inlet hose length	1.65 m
Custom panel-ready	-
Outlet hose length	1.9 m
Appliance placement	Fully built-in
Current	10 A
Connected load	2400 W
Energy efficiency scale	A to G
Water consumption per cycle	9.5 L
Energy consumption per cycle	0.93 kWh
Cycle time	295 min
Noise level	44 dB
Drying system	Heat exchanger
Delay start (max)	24 h
Dishwashing programs	Auto 45-65°C, Eco 50°C, Intensive 70°C, Pre-wash, Quick 45°C
Number of place settings	14 place settings
Number of washing programs	6

Weight and Dimensions

Depth	550 mm
Width	598 mm
Height	815 mm
Weight	35312 g