EasyManua.ls Logo

Siemens SN73HX42VE - User Manual

Siemens SN73HX42VE
60 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Dishwasher
SN73HX42VE
en
Information for Use
Register your product on My Siemens and discover
exclusive services and offers.
siemens-home.bsh-group.com/welcome
The future moving in.
Siemens Home Appliances

Table of Contents

Questions and Answers

  • E
    Elizabeth SmithAug 7, 2025
    What to do if error E:32-00 lights up on my Siemens SN73HX42VE Dishwasher?
    • D
      darryl53Aug 7, 2025
      If error E:32-00 lights up or the water supply indicator is on, it could be due to several reasons. First, ensure that the supply hose is not kinked; install it without any kinks. Second, check if the water tap is turned off, jammed, or furred up; turn it on. Finally, the filters in the water connection of the supply or AquaStop hose might be blocked. To resolve this, switch off the appliance, pull out the mains plug, turn off the water tap, and unscrew the water connection.
  • S
    santosjorgeAug 11, 2025
    What to do if error E:30-00 appears on Siemens SN73HX42VE Dishwasher?
    • J
      Joe MurrayAug 11, 2025
      If error code E:30-00 lights up alternately, the water protection system has been activated. Turn off the water tap.
  • K
    Keith PowellAug 15, 2025
    What to do if error E:31-00 appears on Siemens Dishwasher?
    • S
      Sara WilkinsonAug 15, 2025
      If error code E:31-00 lights up alternately, the water protection system has been activated. Turn off the water tap.
  • D
    David MontoyaAug 19, 2025
    Why does error E:61-03 light up on my Siemens SN73HX42VE?
    • A
      aarontranAug 19, 2025
      Error E:61-03 indicates that water is continuously running into the appliance. You should clean the wastewater pump and secure the cover of the wastewater pump so it clicks into position. Also, check if the wastewater hose is blocked or kinked; reposition it without kinks and remove any residues. Check the connection to the siphon and open if necessary.
  • W
    williamdunnAug 25, 2025
    How to fix error E:20-60 on Siemens SN73HX42VE?
    • G
      Gina AllenAug 25, 2025
      If the E:20-60 error code lights up alternately, it indicates the appliance has detected a calcified heating element. Descale the appliance and operate it with the water softening system.
  • C
    Craig HudsonAug 28, 2025
    What to do if error E:34-00 appears on Siemens Dishwasher?
    • C
      Cynthia MasonAug 28, 2025
      To address error E:34-00, clean the filter, re-insert it into the supply hose, screw the water connection back on, and check for leaks. Then, restore the power supply and switch the appliance on.
  • D
    davidsontoniSep 1, 2025
    Why does error E:90-01 light up on my Siemens SN73HX42VE?
    • D
      Daniel MurphySep 1, 2025
      Error E:90-01 indicates that the mains voltage is too low. Contact an electrician to have the mains voltage and electrical installation checked.

Siemens SN73HX42VE Specifications

General IconGeneral
CategoryDishwasher
TypeFreestanding
Capacity14 place settings
Noise Level44 dB
Water Consumption9.5 liters per cycle
Programs6
Drying Efficiency ClassA
Half Load OptionYes
Dimensions (H x W x D)845 x 600 x 600 mm
Size60cm
Annual Water Consumption2660 litres
Delay StartYes

Related product manuals