How to fix Siemens Dishwasher error E:20-60?
If the E:20-60 error code is appearing alternately on your Siemens Dishwasher, it indicates that the appliance has detected a calcified heating element. To resolve this, you should descale the appliance and operate it with the water softening system.
What to do if Siemens SN73HX60CE shows error E:32-00?
If the E:32-00 error code appears on your Siemens Dishwasher, it could be due to several reasons: * The supply hose might be kinked, in which case you should install the supply hose without kinks. * The water tap might be turned off, jammed, or furred up; ensure that you turn it on. * The filters in the water connection of the supply or AquaStop hose might be blocked. To resolve this, switch off the appliance, pull out the mains plug, turn off the water tap, unscrew the water connection, remove and clean the filter from the supply hose, re-insert it, screw the water connection back on, check for leaks, restore the power supply, and switch the appliance back on.
What to do if Siemens SN73HX60CE Dishwasher displays error E:61-03?
If your Siemens Dishwasher is showing the error code E:61-03, it could be due to a few reasons: * The wastewater pump cover might not be secured properly. Ensure it clicks into position. * The wastewater pump could be blocked, requiring you to clean it. * The wastewater hose might be blocked or kinked. Try repositioning the hose without kinks and remove any residues.
What does error E:30-00 mean on a Siemens SN73HX60CE Dishwasher?
If your Siemens Dishwasher shows the error code E:30-00, the water protection system has been activated. Turn off the water tap and call "Customer Service".
What does error E:31-00 mean on a Siemens SN73HX60CE?
If your Siemens Dishwasher shows the error code E:31-00, the water protection system has been activated. Turn off the water tap and call "Customer Service".
Why does my Siemens Dishwasher show error E:90-01?
If the error code E:90-01 is displayed alternately on your Siemens Dishwasher, it indicates that the mains voltage is too low. Contact an electrician to check the mains voltage and electrical installation.
What should I do if my Siemens Dishwasher shows error E:34-00?
If your Siemens Dishwasher shows the error code E:34-00, you should clean the wastewater pump.
What to do if Siemens SN73HX60CE Dishwasher showing error E:61-02?
If your Siemens Dishwasher displays the error code E:61-02, it means that water is not being drained. Check the connection to the siphon and open it if necessary.
General| Type | Built-in |
|---|---|
| Size | 60 cm |
| Capacity | 13 place settings |
| Noise Level | 44 dB |
| Number of Programs | 6 |
| Dimensions (H x W x D) | 84.5 x 60 x 60 cm |
| Drying System | Zeolith drying |
| Drying Efficiency Class | A |
| Delay Start | Yes |
| Child Lock | Yes |
| Weight | 45 kg |
| Water Consumption | 9.5 L |
| Special Features | HygienePlus |
| Annual Water Consumption | 2660 L |
To Next Page