5450 Four-Port Router User’s Guide Operating System Configuration
Checking TCP/IP Settings (MAC OS 8.6 through 9.x)
1. Select Apple >Control Panel >TCP/IP. This displays the “TCP/IP” window.
2. Select Ethernet or Ethernet built-in from the Connect via drop-down menu.
3. Select Using DHCP Server from the Configure drop-down menu.
4. Close the “TCP/IP window” and click Save.
5. Reboot when configuration is saved. Once rebooted, the computer will pull an IP address from the
DHCP server on the router.
6. Configure the router using the procedure described in the next chapter.
13
To Next Page
Loading...
