5450 Four-Port Router User’s Guide Configuring Advanced Features
Address Translation With NAT
Network Address Translation (NAT) translates an IP address from your home network to an address on
the Internet. It allows only one machine to access the Internet.
To enable and configure NAT address translation:
1. Select Address Translation (NAT) from the “
Address Translation (NAT/NAPT)” window.
2. Click the Configure hyperlink next to Address Translation (NAT). This displays the “NAT Address
Configuration” window.
3. Type the IP address of the one computer in your network that you wish to have access to the
Internet.
4. Click Apply.
59
To Next Page
Loading...
