CC1N7802en
8/11/2021
7
802
Actuators for air and gas
SQN72…
SQN73…
Electromotoric actuators for air dampers and control valves of oil and gas
burners of small to medium heat capacity.
The SQN72/SQN73 and this data sheet are intended for original equipment
manufacturers (OEMs) using the SQN72/SQN73 in or on their products.
Use
The SQN72/SQN73 actuators are designed for positioning and driving air/gas dampers
of oil burners, gas burners, and other ancillary equipment of small and medium heat
capacity. They also offer load-dependent control of the amount of fuel and combustion
air.
The controlling elements are controlled as follows depending on the current burner
load:
In connection with P-PI or PID controllers, such as the RWF5
Directly via the different types of burner controls, such as LOA, LMO, LME, or LFL
In connection with 1- or 2-wire control or 3-position controllers
Features
Impact-proof and heat-resistant plastic housings
Plug terminals for the electrical connections
Maintenance-free gear train, which can be disengaged
Internal position indication
Easy-to-adjust end and auxiliary switches for adjusting the switching points
Internal electronic circuits
Protection type IP54
Holding torque 0.7–1.3 Nm
Running time 4–30 s
Direction of rotation: SQN72 counterclockwise and SQN73 clockwise
To Next Page
Need help?
General
