Additional functions en
21
3. Press the right programme button.
→"Programmes", Page19
4. Press the button for the relevant
additional function.
→"Additional functions", Page21
5. Press for approx. 3seconds.
a The selected programme and the
additional function will flash.
a flashes.
a The programme and the additional
function are saved.
Tip:To reset the programme, either
use the Home Connect app or reset
your appliance back to the factory
settings.
→"Overview of basic settings",
Page36
Additional functions
Additional functions
Additional functions
You can find an overview of the addi-
tional functions that can be selected
here. Different additional functions,
which can be found on the control
panel of your appliance, are available
depending on the appliance configur-
ation.
Additional func-
tion
Use
VarioSpeedPlus
¡ The run time is
shortened by 15% to
75% depending on the
rinse programme.
¡ The additional function
can be activated before
the start of the pro-
gramme and at any
time when the pro-
gramme is running.
¡ Energy and water con-
sumption are increased.
Additional func-
tion
Use
If you select this additional
function, "automatic door
opening" →Page36 in
the "o:02" setting is deac-
tivated.
HygienePlus
¡ To ensure a higher hy-
giene status for the ap-
pliance and tableware,
the temperature is
raised and maintained
for an extra-long period.
¡ Especially suitable for
cleaning chopping
boards or baby bottles.
¡ Continuous use of this
function increases the
hygiene status.
¡ This will increase the
run time and energy
consumption.
IntensiveZone
¡ Switch on with mixed
loads containing table-
ware with different soil-
ing levels, e.g. place
very soiled pots and
pans in the bottom bas-
ket and normally soiled
tableware in the upper
basket.
¡ The spray pressure in
the bottom basket is in-
creased and the max-
imum programme tem-
perature held longer.
This will increase the
run time and energy
consumption.
To Next Page
Loading...
Need help?
General
