Basic operation en
33
Interrupting programme
Note:When you open the appliance
door once the appliance has heated
up, leave the door slightly ajar for a
few minutes and then close it. This
will help prevent excess pressure
building up in the appliance and stop
the appliance door bursting open.
1. Press .
a The programme is saved and the
appliance switches off.
2. Press to resume the pro-
gramme.
Terminate programme
To end a programme early or to
switch from a programme that has
already started, you will need to can-
cel it first.
▶
Press for approx.
4seconds.
a All displays light up.
a As soon as the displays are off,
the display shows "0h:01m" and
the residual water is pumped out.
a The programme is canceled and
ends after approx. 1minute.
Switching off appliance
1. Please note the information on
"Safe use" →Page11.
2. Press .
Tip:If you press during the wash
cycle, the programme currently run-
ning will be interrupted. When you
switch the appliance back on, the
programme continues automatically.
To Next Page
Loading...
Need help?
General
