Migration Guideline TC35 -> TC35i
P R E L I M I N A R Y
TC35_TC35i_01_V01.01 Page 7 of 8 29.01.2003
3 New AT Commands
The AT Cellular command structure for TC35i corresponds to that of TC35. Differences are
listed for each command.
AT-Command /
Feature
Description
AT&W exp. Store current configuration to user defined profile
AT&W is expanded with:
• AT^STPB
• AT+ICF Set TE-TA control character framing
• AT+IFC Set TE-TA local data flow control
• AT\Qn flow control
• AT%D Set circuit Data Terminal Ready (DTR) function mode
AT%D new Automatic dialing phone number in memory ME index 1 with DTR
AT\Vn new the output of the announcement \RLP in CONNECT will be suppressed.
AT^SSET new Information on SIM read, status and break generation for Fax.
• Information when the SIM reading has been completed after startup of
the unit or SIM exchange.
AT+CIND
AT+CMER
new Indicator control
Mobile equipment event reporting
• BER +RSSI (AC43/45)
AT+CLIR new Calling line identification restriction
• Realisation by AT command and additional by *# sequence
AT+CMGL
AT+CMGR
exp.
exp.
List SMS messages from preferred store
Read SMS message
• Output of SMS-Status-Reports in PDU Mode without fillbits (FFs)
AT+CMMS new Leave the data channel open for following messages
AT+CPMS exp. Preferred SMS mesage storage
AT+CRSM exp. Restricted SIM access
• Prefered language
• SCID (Display SIM card identification number) before PIN 1
AT+CSMS
AT+CNMI
exp.
exp.
Select message service
New SMS mesage indications
Output of SMS directly to TE without confirmation with AT+CNMA.
AT+ICF exp. Set TE-TA control character framing
To Next Page
Loading...
