Siemens TC35i User Manual

m o bi l e
TC35i
TC35i Terminal
Siemens Cellular Engine
Version: 02.07
DocId: TC35i_ATC_V02.07

Siemens TC35i Specifications

General

Brand	Siemens
Model	TC35i
Category	Modem
Language	English

Summary

1.4 AT command syntax

1.4.1 Using parameters

Details how to use optional parameters, strings, and numbers in AT commands.

1.6 Flow Control

1.6.2 Hardware flow control (RTS/CTS flow control)

1.8 Errors and Messages

2. Configuration Commands

2.1 AT&F Set all current parameters to manufacturer defaults

Resets all TC35i parameters to factory-defined default values.

2.2 AT&V Display current configuration

Returns the current parameter settings of the TC35i, which vary based on PIN authentication and multiplex mode.

2.3 AT&W Stores current configuration to user defined profile

Saves the current parameter settings to a user-defined profile in non-volatile memory.

2.5 ATV Set result code format mode

2.6 ATX Set CONNECT result code format and call monitoring

2.8 ATZ Set all current parameters to user defined profile

Loads the user profile stored with AT&W, or factory default if no user profile exists.

2.9 AT+CFUN Set phone functionality

Controls the ME's functionality level, including reset, SLEEP modes, and returning to full functionality.

2.9.1 Wake up the ME from SLEEP mode

2.10 AT^SMSO Switch off mobile station

2.12 AT+CMEE Report mobile equipment error

2.12.1 Summary of CME ERRORS related to GSM 07.07

Lists CME ERROR codes and their text descriptions as per GSM 07.07 standard.

2.13 AT+CSCS Select TE character set

2.14 AT^SCFG Extended Configuration Settings

3.2 AT+CIND Indicator control

3.3 AT^SIND Extended Indicator Control

3.4 AT+CEER Extended error report

3.4.1 Cause Location ID for the extended error report

3.5 ATS18 Extended call release report

3.6 AT+CPAS Mobile equipment activity status

4. Serial Interface Control Commands

4.1 AT\Q Flowcontrol

Configures serial interface flow control using XON/XOFF or RTS/CTS hardware handshake.

4.4 AT%D Automatic Dial on DTR Line Activation

4.7 AT+ICF Serial Interface Character Framing

4.8 AT+IFC Set Flow Control separately for data directions

4.10 AT+IPR Set fixed local rate

4.10.1 Autobauding

4.11 AT+CMUX Enter multiplex mode

4.11.1 Restrictions on Multiplex mode

5. Security Commands

5.1 AT+CPIN Enter PIN

Allows the ME to store the entered password, such as SIM PIN1 or PUK1.

5.1.1 What to do if PIN or password authentication fails?

5.2 AT+CPIN2 Enter PIN2

5.3 AT^SPIC Display PIN counter

5.4 AT+CLCK Facility lock

5.6 AT+CPWD Change Password

6.8 AT+CGSN Request product serial number identification (IMEI) identical to GSN

6.9 AT+GSN Request TA serial number identification(IMEI)

6.10 AT+CIMI Request international mobile subscriber identity

7. Call related Commands

7.1 ATA Answer a call

7.2 ATD Mobile originated call to dial a number

7.3 ATD><mem><n> Originate call to phone number in memory

7.4 ATD><n> Originate call to phone number selected from active memory

7.5 ATD><str> Originate call to phone number in memory with corresponding field

7.7 ATDL Redial last telephone number used

7.8 ATH Disconnect existing connection

7.10 AT^SHUP Hang up call(s) indicating a specific GSM04.08 release cause

7.11 ATS0 Set number of rings before automatically answering the call

7.13 ATS7 Set number of seconds to wait for connection completion

7.17 ATO Switch from command mode to data mode

7.18 +++ Switch from data mode to command mode

7.20 AT+CBST Select bearer service type

7.22 AT+CLCC List current calls of ME

7.26 AT^SCNI List Call Number Information

7.27 AT^SLCD Display Last Call Duration

7.28 AT^STCD Display Total Call Duration

8. Network Service Commands

8.2 AT+COPS Operator selection

8.3 AT+CREG Network registration

8.4 AT+CSQ Signal quality

8.5 AT^SMONC Cell Monitoring

8.6 AT^SMOND Selective Cell Monitoring

8.7 AT^MONI Monitor idle mode and dedicated mode

8.8 AT^MONP Monitor neighbour cells

8.11 AT^SPLM Read the PLMN list

8.12 AT^SPLR Read entry from the preferred operators list

8.13 AT^SPLW Write an entry to the preferred operators list

9. Supplementary Service Commands

9.1 AT+CACM Accumulated call meter (ACM) reset or query

9.2 AT^SACM Advice of charge and query of ACM and ACMmax

9.3 AT+CAMM Accumulated call meter maximum (ACMmax) set or query

9.4 AT+CAOC Advice of Charge information

9.5 AT+CCUG Closed User Group

9.6 AT+CCFC Call forwarding number and conditions control

9.7 AT+CCWA Call Waiting

9.8 AT+CHLD Call Hold and Multiparty

9.9 AT+CLIP Calling line identification presentation

9.10 AT+CLIR Calling line identification restriction

9.13 AT+CUSD Supplementary service notifications

10. FAX Commands

10.1 FAX parameters

10.2 AT+FBADLIN Bad Line Treshold

10.3 AT+FBADMUL Error Threshold Multiplier

10.6 AT+FCLASS Fax: Select, read or test service class

10.7 AT+FCQ Copy Quality Checking

10.9 AT+FDCC Query or set capabilities

10.11 AT+FDIS Query or set session parameters

10.12 AT+FDR Begin or continue phase C data reception

10.13 AT+FDT Data Transmission

10.15 AT+FK Kill operation, orderly FAX abort

10.22 AT+FRH Receive Data Using HDLC Framing

10.25 AT+FTH Transmit Data Using HDLC Framing

11. Short Message Service (SMS) Commands

11.1 SMS parameters

Defines various parameters used in SMS messages, including format, address, and user data.

11.2 AT+CMGC Send an SMS command

11.3 AT+CMGD Delete SMS message

11.4 AT+CMGF Select SMS message format

11.5 AT+CMGL List SMS messages from preferred store

11.6 AT+CMGR Read SMS messages

11.7 AT+CMGS Send SMS message

11.8 AT+CMGW Write SMS messages to memory

11.9 AT+CMSS Send SMS messages from storage

11.10 AT+CNMA New SMS message acknowledge to ME/TE, only phase 2+

11.11 AT+CNMI New SMS message indications

11.12 AT+CPMS Preferred SMS message storage

11.13 AT+CSCA SMS service centre address

11.14 AT+CSCB Select Cell Broadcast Message Indication

11.16 AT+CSMP Set SMS text mode parameters

11.18 AT^SCML List Concatenated SMS messages from preferred store

11.19 AT^SCMR Read concatenated SMS messages

11.20 AT^SCMS Send concatenated SMS messages

11.21 AT^SCMW Write concatenated SMS messages to memory

11.22 AT^SLMS List SMS Memory Storage

11.23 AT^SMGL List SMS messages from preferred store without setting status to REC READ

11.25 AT^SMGR Read SMS message without setting status to REC READ

11.26 AT^SSCONF SMS Configuration

11.27 AT^SSDA Set SMS Display Availability

12. SIM related Commands

12.1 AT+CRSM Restricted SIM Access

Provides access to Elementary Files on the SIM, restricted to specific commands and requiring PIN authentication.

12.2 AT^SCKS Query SIM and Chip Card Holder Status

12.3 AT^SSET Indicate SIM data ready

13.2 ^SSTN SAT Notification

13.3 AT^SSTGI SAT Get Information

13.4 AT^SSTR SAT Response

14. Phonebook Commands

14.2 AT+CPBR Read from Phonebook

14.3 AT+CPBS Select phonebook memory storage

14.4 AT+CPBW Write into Phonebook

14.5 AT^SPBC Search the first entry in the sorted telephone book

14.6 AT^SPBD Purge phonebook memory storage

14.7 AT^SPBG Read current Phonebook entries

14.8 AT^SPBS Step through the selected phonebook alphabetically

15.4 AT+CLVL Loudspeaker volume level

15.5 AT+CMUT Mute control

15.7 AT+VTS DTMF and tone generation

15.8 AT^SAIC Audio Interface Configuration

15.9 AT^SNFA Set or query of microphone attenuation

15.10 AT^SNFD Set audio parameters to manufacturer default values

15.11 AT^SNFI Set microphone path parameters

15.12 AT^SNFM Mute microphone

15.13 AT^SNFO Set audio output (= loudspeaker path) parameter

15.14 AT^SNFPT Set progress tones

15.15 AT^SNFS Select audio hardware set

15.16 AT^SNFV Set loudspeaker volume

15.17 AT^SNFW Write audio setting in non-volatile store

15.18 AT^SRTC Ring tone configuration

16.2 AT+CCLK Real Time Clock

16.3 AT^SBC Battery charging / discharging and charge control

16.4 AT^SBV Battery/Supply Voltage

16.5 AT^SCTM Set critical operating temperature presentation mode or query temperature

18.3 Available AT Commands and Dependency on SIM PIN

18.4 AT Command Settings storable with AT&W

18.5 Factory Default Settings Restorable with AT&F

18.6 Summary of Unsolicited Result Codes (URC)

18.7 Alphabetical List of AT Commands