Siemens TC35i - 7.26 ATSCNI List Call Number Information

TC35i AT Command Set
7.26 AT^SCNI
s
m obil e
TC35i_ATC_V02.07 Page 180 of 439 1/30/04
Confidential / Released
7.26 AT^SCNI List Call Number Information
Syntax
Command Description
TA returns a list of current calls of ME.
Parameter Description
call identification number as described in GSM 02.30[19] subclause 4.5.5.1; this number can be used in
AT+CHLD command operations
1...7
Call status of respective call number (first parameter)
0call hold
1 call in progress
2 waiting call
Test Command
AT^SCNI=?
Response(s)
OK
Exec Command
AT^SCNI
Response(s)
^SCNI: <id>
1
[,<cs>[,<number>,<type>]]
^SCNI: <id>
2
[,<cs>[,<number>,<type>]]
[...]
OK
ERROR
+CME ERROR: <err>
PIN ASC0 MUX1 MUX2 MUX3
% % % % %
Reference(s)
SIEMENS
<id>
(num)
<cs>
(num)