Siemens TC35i - Table 2.2: Current Configuration on MUX Channels 2 and 3 (Example)

TC35i AT Command Set
2.2 AT&V
s
m obil e
TC35i_ATC_V02.07 Page 31 of 439 1/30/04
Confidential / Released
Table 2.2: Current configuration on MUX channels 2 and 3 (example)
PIN authentication done No PIN authentication
ACTIVE PROFILE:
E1 Q0 V1 X4 &C1 &D0 &S0 \Q0
S0:000 S3:013 S4:010 S5:008
+CRC: 0
+CMGF: 0
+CSDH: 0
+CNMI: 0,0,0,0,1
+ICF: 3
+IFC: 0,0
+ILRR: 0
+IPR: 57600
+CMEE: 2
^SMGO: 0,0
+CSMS: 0,1,1,1
^SACM: 0,"000000","000000"
^SCKS: 0,1
^SSET: 0
+CREG: 0,1
+CLIP: 0,2
+CAOC: 0
+COPS: 0,0,"operator"
OK
ACTIVE PROFILE:
E1 Q0 V1 X4 &C1 &D0 &S0 \Q0
S0:000 S3:013 S4:010 S5:008
+ICF: 3
+IFC: 0,0
+ILRR: 0
+IPR: 57600
+CMEE: 2
^SCKS: 0,1
^SSET: 0
OK