Siemens TC35i User Manual

TC35i AT Command Set
18.4 AT Command Settings storable with AT&W
s
m obil e
TC35i_ATC_V02.07 Page 427 of 439 1/30/04
Confidential / Released
Table 18.5: Settings Stored to User Profile on MUX Channels 2 and 3
AT+COPS <format>
AT+CREG <n>
Supplementary Service Commands
AT^SACM <n>
AT+CLIP <n>
FAX Commands
AT+FCLASS <n>
Short Message Service (SMS) Commands
AT+CMGF <mode>
AT+CNMI <mode>, <mt>, <bm>, <ds>, <bfr>
AT+CSDH <show>
AT^SMGO <n>
SIM related Commands
AT^SCKS <mode>
AT^SSET <n>
Miscellaneous Commands
ATS3 <n>
ATS4 <n>
ATS5 <n>
AT Command Stored parameters
Configuration Commands
ATQ <n>
ATV <value>
ATX <value>
AT+CMEE <n>
Status Control Commands
AT+CMER <mode>, <ind>
Serial Interface Control Commands
AT\Q <n>
AT Command Stored parameters

Siemens TC35i Specifications

General

Brand	Siemens
Model	TC35i
Category	Modem
Language	English